Table of Contents
Advertisement
Award BIOS
Memory Parity Check
This parameter lets you enable or disable the optional parity DRAM.
The default setting is
Disabled
If you install SIMMs with parity
.
bit chips, you must set this parameter to
Enabled
.
Typematic Rate Setting
Set this parameter to
Enabled
to determine the typematic rate. Set
Disabled
it to
to disregard the rate setting. The default setting is
Disabled.
Typematic Rate
This parameter allows you to control the speed at which the system
registers repeated keystrokes. The typematic rate settings are 6, 8,
6
10, 12, 15, 20, 24, and 30 chars/sec
The default setting is
.
chars/sec.
Typematic Delay
This parameter allows you to control the display time between the first
and the second characters. The typematic delay settings are 250,
500, 750, and 1000 msec. The default setting is
250 msec.
Security Option
The security option settings are System and Setup. The System
option limits access to both the System and Setup. A prompt asking
you to enter your password appears on the screen everytime you boot
the system. The Setup option limits access only to setup. The default
setting for this parameter is
Setup
.
3-10
User's Guide
Advertisement
Table of Contents
