Table of Contents
Advertisement
Award BIOS
Memory Parity Check
This parameter lets you enable or disable the optional parity DRAM.
The default setting is
Disabled
If you install SIMMs with parity
.
bit chips, then you must set this parameter to
Enabled
.
Typematic Rate Setting
Set this parameter to
Enabled
to determine the typematic rate. Set
Disabled
it to
to disregard the rate setting. The default setting is
Disabled.
Typematic Rate
This parameter allows you to control the speed at which the system
registers repeated keystrokes. The typematic rate settings are 6, 8,
6
10, 12, 15, 20, 24, and 30 chars/sec
The default setting is
.
chars/sec.
Typematic Delay
This parameter allows you to control the display time between the first
and the second characters. The typematic delay settings are 250,
500, 750, and 1000 msec. The default setting is
250 msec.
IDE Second-Channel Control
Enabled
This parameter is set to
if the system is using the second
IDE channel. Disable the parameter if only the primary IDE channel is
in use.
4-10
User's Guide
Advertisement
Table of Contents
