Save & Exit Setup - AOpen DP5 User Manual

This utility only detects one set of
parameters for your IDE hard drive. Some
IDE drives can use more than one set of
parameters. If your hard disk is formatted
using different parameters than those
detected,
parameters manually. If the parameters
listed don't match the ones used to format
the disk, the information on that disk won't
be accessible.
parameters displayed do not match those
that used for your drive, ignore them.
Press
correct ones manually from the Standard
CMOS Setup screen.
Save & Exit Setup
This function automatically saves all CMOS values before leaving
Setup.
Exit without Saving
Use this function to exit Setup without saving the CMOS value
changes. Do not use this option if you want to save the new
configuration.
User's Guide
Award BIOS
you have to
If the auto-detected
N
to reject the values and enter the
enter the
3-27