Table of Contents
Advertisement
Enabling the FDC and Super I/O Chip
The 3-pin jumper JP6 enables or disables the super I/O chip. The
SMC665 onboard I/O chip supports two serial ports, one parallel port
and FDD functions. Set the jumper to
a separate I/O card.
Enabled
(default)
Disabled
Selecting the ECP DMA Channel
The jumpers JP2 and JP3 select the DMA channel for extended
capabilities port (ECP) function.
DMA 1
(default)
DMA 3
User's Guide
Hardware Setup
Disabled
if you want to use
JP6
JP2
JP3
2-11
Advertisement
Table of Contents
