Pci Configuration Setup; Pnp Bios Configuration - AOpen DP5 User Manual

PCI Configuration Setup

This screen configures the PCI Bus slots. All the slots use INTA#. If
you install a card, you should set the card to
PCI CONFIGURATION SETUP
AWARD SOFTWARE, INC.
PnP BIOS Auto-config : Disabled
Slot 1 Using INT# : AUTO
Slot 2 Using INT# : AUTO
Slot 3 Using INT# : AUTO
Onboard SCSI : AUTO
1st Available IRQ : 10
2nd Available IRQ : 11
3rd Available IRQ : 9
4th Available IRQ : 5
PCI IRQ Activated By : Level
PCI IDE IRQ Map To: : ISA

PnP BIOS Configuration

Setting this parameter to
IRQ for each slot. Setting it to
assign for each PCI slot and for the onboard SCSI.
Disabled
setting is .
User's Guide
Award BIOS
INTA#.
ROM PCI/ISA BIOS
Onboard PCI SCSI Chip
Onboard PCI IDE Chip
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
COM3 & COM 4 Address
Onboard Parallel Port
Parallel Port Mode
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Enabled automatically sets the available
Disabled
lets you select the IRQ to
: Enabled
: Enabled
: Enabled
: COM1
: COM2
: 338H, 238H
: 278H
: Normal
¯ ® ¬ : Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
The default
3-17