Hardware Setup
5.
Pull down the socket lever to lock the CPU into the socket. See
Step 5.
6.
Plug-in the fan cable into the onboard fan connector.
7.
Set the jumpers properly.
correct jumper settings.
Upgrading the Microprocessor
Follow these steps to upgrade the Pentium CPU:
1.
Turn off the system power.
2.
Remove the CPU from the socket.
3.
Detach the heatsink and the fan.
4.
Install the upgrade CPU.
Microprocessor for the directions.
2-4
See the following sections for the
Refer to the section Installing a
User's Guide