Table of Contents
Advertisement
Video-off Method
If your video display adapter supports the green features, then you
can set this parameter to its default setting which is
SYNC+Blank
. If not, then set this to
The default setting saves more power since it turns off the CRT
vertical and horizontal scanning once the monitor screen blanks.
However, with non-green monitors, CRT scanning does not stop even
if the monitor screen blanks.
Screen-saver software does not work with
this feature.
burning in a static image on the CRT while
the monitor is on. A screen saver cannot
display while the monitor is shut down to
save both energy and the screen.
Doze Mode, Standby Mode, Suspend Mode
These modes set the period of time after which each of these modes
activates.
HDD Power Down
This time-out setting indicates when to shut down the IDE hard disk.
The settings range from 20 sec. to 15 min. or Disabled.
User's Guide
Award BIOS
Blank Setting
.
It is used only to prevent
V/H
3-15
Advertisement
Table of Contents
