Installing The System Board; Installing Expansion Boards - AOpen DP5 User Manual

Installing the System Board

1. Open the system housing.
2. Use at least two of the screws that come with the housing to
secure the board.
3. Attach the power supply cables to the power connector and the
front panel connectors to the multifunction connector. See the
section Connectors.
4. Install any additional components that you have not yet installed.

Installing Expansion Boards

Install expansion boards after you have installed the system board in
the housing.
Follow these steps to install an expansion board.
1. Remove the bracket opposite the slot that you want to use. Save
the cover for future use. Save the screw to secure the expansion
board.
2. Remove the board from its protective packaging.
3. Gently insert the golden edge of the board into the slot until it fits.
4. Secure the board bracket with the screw.
User's Guide
Hardware Setup
Golden Edge
Golden
Edge
PCI Slot
ISA
Slot
2-23