Table of Contents
Advertisement
NS PC87410 Device Drivers
The system board comes with a NS PC87410 software package that
includes two diskettes. The first diskette contains the software drivers
for DOS, Windows 3.1, Windows NT, Novell 3.1X, 4.X and OS/2. The
second diskette contains the software driver for SCO UNIX 3.X.
The following sections tell how to install the device drivers. For more
detailed information, refer to the README file in Diskette 1.
DOS
We recommend that you install the DOS drivers in order to make use
of the special features such as Track Remapping and More than two
Drives support.
To install, simply insert Diskette 1 into drive A and type
e
INSTALL
.
Windows v3.1X
1.
Make sure that the DOS drivers are already installed.
2.
Enter
Windows.
A:\WINDRV/INSTALL.EXE
The 32-bit Windows driver supports the following:
·
A maximum of four drives (two drives per channel)
·
Track Remapping, to support a hard disk capacity over than 528
MB
User's Guide
Click
on
File
Manager.
.
Appendix
B
e
A:
. Enter
Run
B-1
Advertisement
Table of Contents
