AOpen DP5 User Manual page 90

COM3 & COM4 Address
These lines allow you to set the COM3 and COM4 addresses. The
available options are as follows:
·
3E8H, 2E8H
·
2E8H, 2E0H
·
220H, 228H
·
338H, 238H
The default settings are
Parallel Port
This parameter controls the onboard parallel port connector. The
options for this parameter are:
·
378H
·
3BCH
·
278H
·
Disabled
The default setting is 278H
If you are using an I/O card with a parallel
port, make sure that the addresses don't
conflict.
User's Guide
Award BIOS
338H and 238H .
.
4-21