Dual-Processor/ Single-Processor Operation Select - AOpen DP5 User Manual

Hardware Setup

Dual-processor/ Single-processor Operation Select

The DP5 dual Pentium board supports both dual-processor and
single-processor operation. Set jumpers JP17, JP18, JP19, JP20
and JP21 according to the number of processors operating.
JP17
Single processor
(only for SCO
UNIX)
Dual processor
The jumper settings for single-processor
operation are applicable only for the SCO
UNIX
environments, the jumpers must be set for
dual-processor operation regardless of the
number of processors installed.
2-6
JP18 JP19 JP20
environment. For
JP21
other
User's Guide