Extended BIOS RAM Area
This function allows you to relocate the BIOS from ROM to RAM.
Relocating to RAM enhances system performance as information
access is faster than ROM. The parameter settings are 0:300 and
DOS 1K. The default address is
Wait for F1 If Any Error
If this option is enabled, the BIOS waits for the end user to press
before continuing. If this option is disabled, the BIOS continues the
boot process without waiting for
System Boot-up Num Lock
Setting this parameter to
numeric keypad. Set this parameter to
Disabling the numeric function allows you to use the numeric keypad
for cursor control. The default setting is
Numeric Processor Test
This parameter is non-configurable and auto-detected by the system.
If the CPU in use is a DX CPU, this parameter is automatically set to
Enabled
However, for the SX CPU, the setting is changed to
.
Disabled
This is because the SX CPU does not have an
.
integral numeric coprocessor.
Floppy Drive Seek at Boot
When enabled, the BIOS detects whether there is a floppy disk drive
installed. Disable the parameter to bypass the function.
User's Guide
AMI BIOS
0:300
.
l
to be pressed.
On
enables the numeric function of the
Off
to disregard the function.
On
.
l
3-9