Receiving Documents Manually - Canon MP 1000 User Manual

Receiving Documents Manually

You may want to set the MultiPASS 1000 to receive documents
manually in the following cases:
Keep in mind that you cannot use manual receiving if a document
is in the Automatic Document Feeder (ADF) waiting to be sent.
1.
ANS HOOK UP
MANUAL
2.
3.
Your MultiPASS 1000 begins receiving the document.
Chapter 7
You want to receive a document while you print reports,
register information, or use the MultiPASS 1000 as a computer
printer.
You want to personally check each incoming call to see if it is
from a fax or from a person.
Press the
ANS HOOK UP/MANUAL
The light is on to show that the MultiPASS 1000 is
MANUAL
set for manual receiving.
If the light is not on, press the
button to turn it on.
When the MultiPASS 1000 rings, pick up the handset.
If you hear a person's voice, start your conversation. If the
caller wants to send a document after talking to you, press
to receive the document.
START/COPY
or
If you hear a slow beep, another fax is trying to send you a
document. Press
START/COPY
Hang up the handset after the MultiPASS 1000 displays
. If you don't hang up, the MultiPASS 1000 beeps
RECEIVING
intermittently for a few seconds after you receive the
document. To turn off the beeping, see the
description on page 3-17.
The MultiPASS 1000 beeps once to show that the document
was received. If an error occurs, the MultiPASS 1000 beeps
intermittently for a few seconds. If this happens, contact the
other party and have them resend the document.
To stop receiving before completion, press
If the light is flashing, correct the error condition and
ALARM
press . If necessary, refer to Chapter 14, Troubleshooting.
STOP
button.
ANS HOOK UP/MANUAL
.
OFF HOOK ALARM
.
STOP
Receiving Fax Documents
7-9