Table of Contents
Advertisement
J
Jacks
The telephone receptacles on your wall or in your MultiPASS 1000
used to connect the MultiPASS 1000 to the telephone line, handset,
answering machine, extension telephone, or data modem.
M
Manual dialing
Pressing the individual buttons on the numeric keypad to dial a fax
or telephone number. Also called regular dialing.
Manual receiving
A setting that allows you to answer all incoming telephone and fax
calls. If you hear a slow beep it indicates an incoming fax
transmission from another machine. Just push the
START/COPY
button to receive the incoming fax.
Manual redialing
When you use regular dialing, you can redial a number manually
simply by pressing
on the operation panel. The last
REDIAL
number called is the number redialed.
Memory broadcast
The ability to scan documents into memory and send it to as many
as 97 locations using automatic or manual dialing. If you use this
feature regularly for the same locations, see Group dialing. The
MultiPASS 1000 can hold approximately 50 pages (based on CCITT
#1 Chart) in memory.
Memory sending
Scans a document into memory before the MultiPASS 1000 dials
the number and sends it. This method is faster than direct sending
and it allows you to retrieve your original document immediately
after scanning.
Modem
A device that converts (MOdulates) digital data from transmission
over telephone lines. At the receiving end, this device converts the
modulated data (DEModulates) to digital format that the computer
understands.
MultiPASS Desktop Manager for Windows software
Canon's exclusive software package that allows you to use the
MultiPASS 1000 with your Windows software applications. You
must install the desktop manager to use your MultiPASS 1000 as a
printer, scanner, or PC fax.
G-6
Glossary
Advertisement
Table of Contents
