Switching Temporarily To Tone Dialing - Canon FAXPHONE L120 Advanced Manual

Advanced Fax
1
Features
Status Monitor
2
Reports and Lists
3
Troubleshooting
4
Appendix
5
Table of Contents
Index
■

Switching Temporarily to Tone Dialing

If your machine is set for pulse dialing, use the procedure below
to switch to tone dialing to use information services (i.e., banks,
airline reservations, and hotel reservations).
NOTE
This feature is available only when using [Hook] or the handset.
1.
Press [Hook].
You can also lift the handset instead.
2.
Use the numeric buttons to dial the required
information service.
3.
When the recorded message of the
information service answers, press [Tone] to
switch to tone dialing.
If you pressed [Hook] in step 1, you can pick up the handset if you
need to talk to the other party.
4.
Use the numeric buttons to enter the numbers
requested by the information service.
5.
When finished, press [Hook] to disconnect the
call.
– If you used the handset, hang up to disconnect the call.
– Tone dialing is canceled when you disconnect the call.
TOP
Back Previous Next
1-5