Switching Temporarily To Tone Dialing - Canon Color imageCLASS MF8170c Facsimile Manual

For a longer pause, press [Redial/Pause] again for another two-second pause.
Alternatively, you can change the length of the pause. (See <2. PAUSE TIME> of
"Menu Descriptions," on p. 8-4.)
Use the numeric keys to dial the country code, the area code, and
the fax/telephone number of the other party.
NOTE
If you enter a wrong number, press [Stop/Reset] ➞ start again from step 3.
If you make a mistake, press [ (-)] or [Clear] to delete the last digit. Or press and hold
[ (-)] or [Clear] to delete all the digits you entered.
Press [B&W Start].
4
NOTE
To cancel sending after dialing has started, press [Stop/Reset] ➞ follow the instructions
in the LCD.
To take advantage of the speed dialing features of the machine, register frequently used
overseas numbers for one-touch or coded speed dialing. (See Chapter 3, "Speed
Dialing.")

Switching Temporarily to Tone Dialing

Many banks, airline, and hotels provide automated information services that require
tone dialing. If the machine is connected to a rotary pulse line, follow this procedure
to set the machine temporarily for tone dialing:
Press [FAX].
Press [Hook] or pick up the handset of your telephone.
NOTE
When using your telephone, you need to connect it to the machine. (See "Connect the
telephone cable," in the Set-Up Instructions for the Machine.)
Enter a destination using the numeric keys on your telephone or
using a one-touch speed dialing key, coded speed dialing code,
[Redial/Pause], or the numeric keys on the machine.
4-14 Special Dialing