Table of Contents
Advertisement
7.
8.
9.
N
If you are sending to more than one relay fax, you must use
memory sending.
10. Press
11. Enter the fax number(s).
12. Press
The MultiPASS 1000 sends the document to the relay fax(es). See
Transmitting the Document on page 5-11 for details.
Chapter 10
Use the numeric keypad to enter the group number.
If the group number is a single digit, precede it with
If you make an error entering the group number, press
and then enter the number correctly.
CLEAR
Press
.
START/COPY
DOCUMENT READY
RELAY 08
To use memory sending or to send to more than one relay fax,
press
. Otherwise, go to step 11.
FUNCTION
SELECT MENU
MEMORY TRANSMISSION
DOCUMENT READY
RELAY 08 MEMORY
If you are using direct sending, you can send to one relay
fax only.
If you are using memory sending, you can send to up to 97
relay fax machines. See Sending to More Than One Location
on page 10-1 for details.
.
START/COPY
If you are using memory sending, the MultiPASS 1000
scans up to 50 letter-size pages (based on CCITT #1 Chart)
into memory. See Sending Large Documents on page 5-10 for
details.
.
Special Sending Procedures
.
0
10-7
Advertisement
Table of Contents
