Table of Contents
Advertisement
Turning on Automatic Receiving for Messages
and Documents
To set the MultiPASS 1000 to allow callers to leave a message and
send documents when you are away from your office, follow these
steps:
1.
2.
ANS HOOK UP
MANUAL
3.
ANS HOOK UP
MANUAL
8-6
Using the Telephone, an Answering Machine, and a Modem
Make sure the answering machine is properly connected to the
MultiPASS 1000 (see page 8-5).
When you leave the office, press the
button until the
ANS HOOK UP
Now callers may leave messages and/or send documents.
If your MultiPASS 1000 runs out of paper or ink, it receives
the document and stores it in memory. (To print out
documents in memory, see Receiving Documents in Memory
on page 7-7.)
When you return, press the
until both lights are off. Also, turn off the answering machine.
Alternatively, press the
until only the
MANUAL
MultiPASS 1000 will only receive documents manually.
(See Receiving Documents Manually on page 7-9.)
ANS HOOK UP/MANUAL
light comes on.
ANS HOOK UP/MANUAL
ANS HOOK UP/MANUAL
light is on. In this case, the
button
button
Chapter 8
Advertisement
Table of Contents
