Canon MP 1000 User Manual page 87

2.
< >
3. Dial the number of the receiving fax.
4.
The MultiPASS 1000 begins sending the document.
Chapter 5
Press the arrow keys to change the density.
Press to darken the image and press
<
image.
DOCUMENT READY
TEL = 15164886700
Use the numeric keypad to enter the number. See page 3-3
for details.
You can also use any of the automatic dialing methods
described in Chapter 6, Using Automatic Dialing.
Press .
START/COPY
TRANSMITTING OK
The MultiPASS 1000 beeps once to indicate that the document
has been sent successfully.
If an error occurs during sending, the MultiPASS 1000 beeps
intermittently for a few seconds. If this happens, try sending
the fax again.
The MultiPASS 1000 automatically redials if the receiving fax
machine does not answer or if the line is busy. (You can specify
the number of times it redials; see Auto Redial, on page 5-17.)
To stop sending before the fax is finished, press
may need to lift the operation panel to remove the document.
If so, be sure to close the operation panel and press
again.
If the light is flashing for any reason, correct the
ALARM
problem and then press
Troubleshooting.
to lighten the
>
. If necessary, see Chapter 14,
STOP
Sending Fax Documents
. You
STOP
STOP
5-5