Canon MP 1000 User Manual page 230

Message
MEMORY FULL
MULTI TRANSACTION
ON
NO CONFID. TX
NO ORIGINAL
RELAY TX
14-12
Troubleshooting
Error
code Cause
# 037 The memory of the
MultiPASS 1000 is full
because it has received
too many documents.
The memory is full
because you tried to
send too many
pages at once.
Your MultiPASS 1000
is sending to more than 1000 to continue, do nothing.
one location.
# 033 You cannot send a
confidential document
because the other
party's fax does not
have confidential
receiving capability.
# 034 The confidential box
number you specified
does not exist in the
other party's fax.
The memory of the
other fax is full.
035 You cannot relay
#
documents because the
other party's fax does
not have relay capability.
# 036 The other party did not
set their fax to operate
as a relay fax.
You have specified
the wrong relay group
number.
The memory of the
other fax is full.
Action
Print out any documents that
are stored in memory. Then
start the operation again. See
page 7-7 for details.
Divide the documents and
send each part separately.
See page 5-10 for details.
If you want the MultiPASS
If you want to stop sending,
press .
STOP
Have the other party use a
Canon fax that has the
confidential receiving
feature.
Contact the other party to
obtain the correct confidential
box number.
Contact the other party and
have them print out the
documents already stored in
the memory of their fax so
you can send your document.
Have the other party use a
Canon fax that has relay
capability.
Contact the other party and
have them make the
appropriate settings in
their fax.
Contact the other party to
obtain the correct relay group
number.
Contact the other party and
have them print out the
documents already stored in
the memory of their fax so
you can send your document.
Chapter 14