Table of Contents
Advertisement
This chapter describes how to register information in your
MultiPASS 1000. It includes:
Guidelines for Registering Information
When you are registering information in your MultiPASS 1000,
follow these guidelines:
After the call, start the registration procedure again from the
beginning.
Chapter 3
Registering Information in
the MultiPASS 1000
Registering guidelines
• Using the menu system
• Entering numbers
• Entering names during registration
Personalizing your MultiPASS 1000
• Identifying your documents
• Setting the date and time
• Registering your fax number
• Registering your name
Customizing the MultiPASS 1000
• Customizing your ID
• Customizing the LCD display
• Customizing MultiPASS 1000 sounds
If you pause and do not make an entry for more than 60
seconds, the MultiPASS 1000 returns to standby mode. You
must start the procedure over from the beginning.
If you make a mistake while entering registration information,
you can press
and start the procedure over from the
STOP
beginning, or you can press
dialing keypad) and re-enter the current information.
If the MultiPASS 1000 rings while you are entering registration
information, press
STOP
• If you hear nothing or a slow beep, someone is trying to
send a fax; press
START/COPY
• If it is a phone call, you can converse normally.
Registering Information in the MultiPASS 1000
Chapter 3
(on the one-touch speed
CLEAR
and lift the handset.
.
3-1
Advertisement
Table of Contents
