Chapter 7 Receiving Fax Documents - Canon MP 1000 User Manual

This chapter explains how to receive fax documents with your
MultiPASS 1000. It includes:
The procedures for receiving depend on whether you use the
MultiPASS 1000 for both fax and telephone communication or just
for fax communication.
C
Do not pull received documents or printouts from your MultiPASS
1000. Always wait until the unit ejects a page completely and beeps
before you remove a page. If you pull a document out before it is
ejected, the message
display. If you see this message, refer to Chapter 14, Troubleshooting.
Chapter 7
Receiving Fax Documents
Receiving documents over a dedicated fax line
Receiving both documents and telephone calls over a shared
fax/telephone line (
FAX/TEL SWITCH
Receiving documents in memory
Receiving documents manually
Receiving documents using an extension telephone
Customizing the receiving operations
• Receiving oversized documents
• Setting up special receiving features
• Customizing the
FAX/TEL SWITCH
• Restricted receiving
• Customizing the receiving speed
If you have one phone line in your office, you probably intend
to use the MultiPASS 1000 for both fax and telephone
communication.
If you have two phone lines in your office, you probably plan
to use one line for the MultiPASS 1000 and the other line for
your telephone.
DARK PAPER USED
Chapter 7
)
feature
may appear in the LCD
Receiving Fax Documents
7-1