Indicator And Projector State - Eiki EK-306U Owner's Manual

Main menu Sub menu
Set Slide
Slide transition effect
Memory Viewer
Sort Order
Rotate
Best Fit
Repeat
Apply
Input
H-sync freq.
V-sync freq.
Info. Lamp status
Lamp counter
Power management
Image mode
Input
Computer 1
Computer 2*
* Computer 2 can't be
selected when using
HDMI
the VGA IN 2/VGA
OUT terminal as
Component
VGA OUT.
Video
S-video
Network
Memory Viewer
USB Display
76
Appendix
Setting Note
Slide down
Slide right
Extend order
Size order
Timer order
Name order
No Rotate
270 Degrees
180 Degrees
90 Degrees
On/Off
On/Off
Appendix

Indicator and projector state

Check the indicator to know about the state of projector.
Indicator
POWER
WARNING
(Green/Red/
(Red)
Yellow)
The projector is in Off status (without AC power supply).
The projector is in standby status. Press Standby button to turn it on.
The projector is in normal status.
It is ready for standby or the lamp is cooling. You may power on the projector
only after the lamp is fully cooled and the POWER light indicator stops flashing.
The projector is in Ready mode.
The projector cannot power on, as its internal temperature is too high. You
may power it on after it is fully cooled, temperature backs to normal, and the
POWER light indicator turns red.
The projector detects lamp abnormality and switches into standby mode.
The projector detects the temperature abnormality and switches into standby
mode.
The projector detects power abnormality.
The projector detects fan abnormality.
The projector detects IRIS abnormality.
The projector detects its usage time ≥ the life of the projector -300H when the
projector usage time <1.1 times the life of the projector.
The projector detects its usage time ≥ 1.1times the life of the projector.
Green Red
Flash green Flash red
State of projector
Off
Yellow
Flash Yellow
77