Eiki EK-306U Owner's Manual page 20

Color adjust (Video,S-video,Component)
1 Press MENU button on the remote control or
top control to display screen menu. Press
 button to select "Color adjust", then
press the OK button.
2 Press button to select the item you want
to set, press the OK button.
3 Press button to adjust the data.
Contrast
Press  to decrease the contrast and  to
increase it.
Brightness
Press  to decrease the brightness and  to
increase it.
Color
Press  to decrease the chroma and  to
increase it.
Tint
Press  to select the appropriate tone for the
image.
Red (White balance)
Press  to lighten the red tone and  to deepen
it.
Green (White balance)
Press  to lighten the green tone and  to
deepen it.
Blue (White balance)
Press  to lighten the blue tone and  to deepen
it.
Sharpness
Press  to decrease the sharpness of an image
and  to increase it.
√ Note:
- Signal input "Video", "S-video" or "Component",
"Tint" is in grey, it is disable.
- If you only adjust projector to "Video", "S-video"
or "Component" , "Sharpness" is disable.
38
Color adjust
Color adjust (Video, S-video, Component)
Color adjust
Image mode Standard
Contrast
Brightness
Color
Tint
Red
Green
Blue
Sharpness
The projector has "Setting" menu that allows you to set the other various functions described as
follows.
1 Press MENU button on the remote control or
top control to display screen menu. Press
 button to select "Setting", then press
the OK button.
2 Press button to select the item you
32
want to set, press the OK button.
32
3 Press button to adjust the item, then
32
32
press the OK button.
32
32
32
8
On start
Enable the projector to be turned on
automatically just by connecting the AC
power cord to an outlet when this function
is set to On.
On
Start the projection immediately, enter
countdown display.
Off
Start up in the standby mode.
Standby mode
This function is available when operating the
projector via network.
Press button to select the item below:
Eco.
Restrict some functions in the standby mode to
reduce power consumption. In this case, you
cannot use network functions and some RS-232C
commands.
Normal
Do not restrict network function and serial
communication function even in the standby
mode.
Setting
Setting menu
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal Computer 2
Sound
HDMI Setup
On start
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal Computer 2
Sound
HDMI Setup
Standby mode
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal Computer 2
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On
39