Eiki EK-306U Owner's Manual page 22

Iris
This function is used to increase the contrast of
the image.
On .... Enable Iris function, increase the
contrast of the image.
Off .... Disable Iris function.
Terminal
The VGA IN 2/VGA OUT terminal can be used
as computer input or monitor output. Press▲
to select input or output.
VGA 2 ......VGA 2 input.
Monitor out ....... Monitor out.
Sound
This item is used to adjust the volume.
Sound
Press  button to increase the volume, press
 button to decrease the volume. (0~25)
Mute
function. (On/
Press ▲ button to switch mute
Off)
42
Setting
Iris
Setting
On start Off
Standby mode Eco
High land Off
Lamp control
Cooling fast Normal
Closed caption Off
Key lock
Iris On
Terminal Computer 2
Sound
HDMI Setup
Terminal
Setting
On start Off
Standby mode Eco
High land Off
Lamp control
Cooling fast Normal
Closed caption Off
Key lock
Iris On
Terminal Computer 2
Sound
HDMI Setup
Sound
Setting
Sound
Volume 12
Mute Off
HDMI setup
When the external equipment is connected to "HDMI" terminal, if the image is not projected
properly, please switch the settings of "Image" or "Sound" in "HDMI setup" menu.
1 Press the MENU button to display the screen
menu. Press  button to select the
"Setting" menu icon. Press the OK to enter
the submenu entry.
2 Press  button to select "HDMI setup"
and then press the OK button.
3 Press  button to select "Image" or
"Sound" to adjust.
4 Press  button to switch the item.
Image
64-940 ....... Select when the HDMI terminal
of an external device (such as a
blu- ray player) is connected to the"
HDMI" terminal.
0-1023 ...... Select when the DVI-D terminal
output of an external device (such
as a computer) is connected to the
"HDMI" terminal via a conversion
cable or similar cable. Select also
when the HDMI terminal output of
a computer or other device is
connected to the "HDMI" terminal.
Note:
The optimal setting varies depending on
the output setting of the connected external
device. Refer to the operation instruction of
the external device regarding the output of the
external device.
Sound
HDMI .......... Select when the HDMI cable is
connected, the image and audio
are transmitted, and you do not
need to connect the audio signal
separately.
Computer ... Select when the DVI-D terminal
output of an external device (such
as a computer) is connected to
the "HDMI" terminal via a
conversion cable or similar cable.
The sound will not be transmitted,
the audio signal is input to "AUDIO
IN" terminal.
Setting
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal Computer 2
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
43