Indicator And Projector State - Eiki EK-110U Service Manual

Indicator and projector state

Check the indicator to know about the state of projector
Indicator
WARNING POWER
(Red) (Green/Red
/ Yellow)
Green
Flash green
* When the lamp reaches the end of its life, the LAMP indicator lights Yellow. In this
case, replace the lamp with a new one promptly.
Projector is in Off status (without AC power supply).
Projector is in standby status. Press Standby button to turn it on.
Projector is in normal status.
It is ready for standby or the lamp is cooling. You may power on your projector
only after the lamp is fully cooled and the POWER light indicator stops flashing
Projector is in Ready mode.
Projector cannot power on, as its internal temperature is too high.
power it on after it is fully cooled, temperature backs to normal, and the
POWER light indicator turns red.
Projector cannot light on, Please check the unit's lamp cover whether close well, or
the cover switch unnormal. If lamp cover, and cover switch is ok, but the unit still not
light up, thus please check Lamp, Ballast & it's connection pulg well.
Projector detects lamp abnormality and switches into standby mode.
Projector detects the temperature abnormality and switches into standby mode.
Projector detects power abnormality.
Projector detects fan abnormality.
Projector detects its usage time ≥ the life of the projector -300H when the
projector usage time <1.1 times the life of the projector.
Projector detects its usage time ≥ 1.1times the life of the projector.
Red
Flash red
State of projector
Yellow
Flash Yellow
User may
Off
15