Eiki EK-306U Owner's Manual page 18

Menu Position
This function is used to change the position of
screen menu.
1 Press MENU button on the remote control
to display screen menu. Press  button to
select "Display", then press the OK button.
2 Press button to select "Menu position",
press the OK button.
3 Press button to select the item you want
to set, press the OK button.
Upper left
Menu locates on upper left of the screen.
Upper right
Menu locates on upper right of the screen.
Center
Menu locates at the center of the screen.
Lower left
Menu locates on lower left of the screen.
Lower right
Menu locates on lower right of the screen.
Background Display
This function is used to select the screen
background of the projector when there is no
signal detected.
1 Press MENU button on the remote control
or top control to display screen menu. Press
 button to select "Display", then press
the OK button.
2 Press  button to select "Background
display", press the OK button.
3 Press  button to select the item you want
to set, press the OK button.
Black .... Select black background.
Blue ...... Select blue background.
34
Display
Menu position
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect Normal
Project way Front
Menu position Center
Background display Blue
System 1024 x 768, 60Hz
Background display
Display
Auto PC adj.
Fine sync 17
H Position 0
V Position 0
H. Size 0
Aspect Normal
Project way Front
Menu position Center
Background display Blue
System 1024 x 768, 60Hz
System
Computer system select
The projector automatically tunes to various types of computers with its function of Multi-scan system and
Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically detects the
signal format and tunes to project proper images without any additional setting.
17
0
One of the following messages may appear:
0
0
Auto
-----
Select computer system manually
The system can also be selected manually.
1 Press MENU button on the remote control or
on top control to display the screen menu.
Press  button to select the "Display" icon,
and press the OK button.
2 Press  button to select "System" and
press the OK button.
3 Press  button to select the required
system and then press the OK button.
Note:

When HDMI, Network, Memory Viewer, USB
Display is selected, System menu for computer
is disable.
Video or S-video
Auto
The projector automatically detects an incoming
video system,and adjusts itself to optimize its
performance. When Video System is PAL-M,
PAL-N or PAL60, select the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N/
PAL60
If the projector cannot reproduce proper video
images, select a specific broadcast signal format
from PAL, SECAM, NTSC, NTSC 4.43, PAL-M,
PAL-N and PAL60.
Display
When the projector cannot recognize
the connected signal conforming to
the provided computer system, Auto
is displayed on the System menu
box and the Auto PC Adj. function
works to display proper images. If
the image is not projected properly, a
manual adjustment is required.
There is no signal input from computer.
Check the connection between the
computer and projector.
System menu
Display
Auto PC adj.
Fine sync 17
H Position 0
V Position 0
H. Size 0
Aspect Normal
Project way Front
Menu position Center
Background display Blue
System 1024 x 768, 60Hz
System
System for computer signal
Display
System
1024 x 768, 60Hz
----
----
----
----
----
System for Video or S-video signal
Display
System
AUTO
PAL
SECAM
NTSC
NTSC4.43
PAL-M
PAL-N
PAL60
35