Indicator And Projector State - Eiki EK-120 Series Owner's Manual

Indicator and projector state

Check the indicator to know about the state of projector.
Indicator
POWER
WARNING
(Green/Red/
(Red)
Yellow)
Green
Flash green
Appendix
Your projector is in Off status (without AC power supply).
Your projector is in standby status. Press Power button to turn it on.
Your projector is in normal status.
It is ready for standby or the lamp is cooling. You may power on your projector
only after the lamp is fully cooled and the POWER light indicator stops flashing.
Your projector is in Ready mode.
Your projector cannot power on, as its internal temperature is too high. You
may power it on after it is fully cooled, temperature backs to normal, and the
POWER indicator stop flashing.
Your projector detects lamp abnormality and switches into standby mode.
Your projector detects the temperature abnormality and switches into standby
mode.
Your projector detects lamp abnormality, and switches into cooling mode..
Your projector detects its usage time ≥ the life of the projector when the projec-
tor usage time <1.1 times of the life of the projector.
Your projector detects its usage time ≥ 1.1times of the life of the projector.
Red
Flash red
State of projector
Yellow
Flash Yellow
Off
73