Eiki EK-306U Owner's Manual page 16

Basic operation
Input select
Direct Operation
Press VGA, HDMI or Video on the remote control
as input source.
Menu operation
1 Press INPUT button on the top control to
display the input select menu.
2 Press  button to select VGA 1, VGA 2,
HDMI, Component, Video, S-video, Network,
Memory Viewer or USB Display, then press
the OK button.
When input source is from
VGA 1
computer connected to VGA IN 1
terminal with VGA cable, please
select "VGA 1".
When input source is from
VGA 2
computer connected to VGA IN 2 /
VGA OUT terminal with VGA cable,
please select "VGA 2".
When input source is from
HDMI
equipment connected to HDMI
terminal with HDMI cable, please
select "HDMI".
Select it when the input source
Component
is from the video equipment
connected to YPbPr terminal.
Select it when the video input
Video
signal is connected to VIDEO IN
terminal.
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button,
the input signal will be searched automatically.
- When VGA IN 2/VGA OUT terminal is used as VGA OUT, Computer 2 can not be selected.
30
Remote control
INPUT
INPUT
VIDEO
VGA VIDEO HDMI
VGA
HDMI
AUTO MENU
Top control
KEYSTONE IMAGE FREEZE PATTERN
SCREEN LAMP MUTE INFO.
BLANK
+ +
D.ZOOM VOLUME TIMER
- -
INPUT button
Input select menu
VGA 1
VGA 2
HDMI
HDMI 2(MHL)
Component
Video
S-video
Network
Memory Viewer
USB Display
Basic operation
Input select
Direct Operation
Press VGA, HDMI or Video on the remote control
as input source.
Menu operation
1 Press INPUT button on the top control to
display the input select menu.
2 Press  button to select VGA 1, VGA 2,
HDMI, Component, Video, S-video, Network,
Memory Viewer or USB Display, then press
the OK button.
Select it when the video input
S-video
signal is connected to S-VIDEO
IN terminal.
When input source is from
Network
network connected to LAN
terminal with LAN cable, please
select "Network".
When input source is from device
Memory Viewer
connected to USB-A terminal,
please select "Memory Viewer".
When input source is from device
USB Display
connected to USB-B terminal,
please select "USB Display".
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button,
the input signal will be searched automatically.
- When signal is in "USB Display","Memory Viewer" and "Network", FREEZE, ASPECT, IMAGE,
AUTO SETUP and SCREEN function cannot work.
- Memory Viewer function, please refer to page 62-63.
- USB Display function, please refer to page 64-65.
Remote control
INPUT
INPUT
VGA VIDEO HDMI
AUTO MENU
Top control
KEYSTONE IMAGE FREEZE PATTERN
SCREEN LAMP MUTE INFO.
BLANK
+ +
D.ZOOM VOLUME TIMER
- -
INPUT button
Input select menu
VGA 1
VGA 2
HDMI
HDMI 2(MHL)
Component
Video
S-video
Network
Memory Viewer
USB Display
31