Eiki EK-306U Owner's Manual page 30

Network Control Instructions
"Image Setup" page
① Aspect
Switches the aspect of the projected image.
② Fine sync
Adjusts the fine sync of the projected image.
③ H Position
Adjusts the horizontal position of the projected
image.
④ V Position
Adjusts the vertical position of the projected
image.
⑤ H.Size
Adjusts the total number of dots of the
projected.
⑥ Freeze
Switches the freeze function between on
and off.
58
⑦ Auto PC adj.
Executes the Auto PC adj. function.
⑧ V Keystone
Corrects the keystone in vertical direction.
⑨ H Keystone
Corrects the keystone in horizontal direction.
⑩ Curved Correction
Corrects the pincushion or barrel of the
projected image.
⑪ Corner correction
Corrects the four corners of the projected
image.
"Network Setup" page
①
②
③
④
⑤
① LAN Setup
⑥
Select [Obtain an IP address automatically]
⑦
if you want to enable the DHCP client.
⑧
⑨
IP Address
Enter the IP address when not using a DHCP
⑩
server.
Subnet
Enter the subnet mask when not using a
DHCP server.
⑪
8. PwPresenter software: when "Network" is selected in Source Select, you can project the current
computer images via network.
Input the IP address of the projector in webpage to enter the Network Display System, click
"Download" to download the PwPresenter software according to the operation system.
9. Click icon to access the PwPresenter software.
Network Control Instructions
Gateway
Enter the default gateway address when
not using a DHCP server.
DNS
Enter the DNS server when not using a
DHCP server.
② Apply
Updates the settings.
①
② ③
④ ⑤
①
②
⑥
59