Indicator And Projector State - Eiki EK-110U Owner's Manual

Indicator and projector state

Check the indicator to know about the state of projector.
Indicator
POWER
WARNING
(Green/Red/
(Red)
Yellow)
Green
Flash green
* When the lamp reaches the end of its life, the LAMP indicator lights Yellow. In this case,
replace the lamp with a new one promptly.
76
Appendix
Your projector is in Off status (without AC power supply).
Your projector is in standby status. Press Standby button to turn it on.
Your projector is in normal status.
It is ready for standby or the lamp is cooling. You may power on your projector
only after the lamp is fully cooled and the POWER light indicator stops flashing.
Your projector is in Ready mode.
Your projector cannot power on, as its internal temperature is too high. You
may power it on after it is fully cooled, temperature backs to normal, and the
POWER light indicator turns red.
Your projector detects lamp abnormality and switches into standby mode.
Your projector detects the temperature abnormality and switches into standby
mode.
Your projector detects power abnormality.
Your projector detects fan abnormality.
Your projector detects IRIS abnormality.
Your projector detects its usage time ≥ the life of the projector -300H when the
projector usage time <1.1 times the life of the projector.
Your projector detects its usage time ≥ 1.1times the life of the projector.
Red
Flash red
State of projector
Yellow
Flash Yellow
Off