Display; H Position - Eiki EK-306U Owner's Manual

Auto PC adj.
Auto PC Adjustment function is provided to automatically adjust Fine sync, Horizontal, Vertical and H.Size
to conform to the computer.
Menu operation
Auto PC adj.
1. Press MENU button on the remote control
or top control to display screen menu.
Press  button to select "Display", then
press the OK button.
2. Press  button to select "Auto PC adj.",
then press the OK button. "Please wait" will
be displayed on the screen, the Auto PC adj.
function will be executed.
Fine sync
You can cut off flicker from the image displayed
by pressing  to adjust the value.(from 0 to
31).

H Position

Press  to adjust the horizontal image
position.
V Position
Press  to adjust the vertical image position.
H. Size
This function is used to adjust and minimize
the effect of interference caused by projection
of patterns consisting of vertical stripes.
The projection of the vertical striped pattern
may cause cyclic patterns (noise). Adjust to
minimize the amount of interference.(From -15
to +15).
H.Size must be set before adjust Fine sync.
√ Note:
The adjustment of Fine sync, H Position, V
Position and H.Size is only for computer
signal input.
32

Display

Auto PC adj. Menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System 1024 x 768, 60Hz
Note:
- The projector executes the Auto PC adj.
automatically when the computer signals input
the projector for the first time.
- Automatic adjustment may not work depending
on the model of the computer and the input
signal.
- The Auto PC adj. cannot be operated when
480i, 576i, 480p, 576p, 720p 1080i or 1080p is
selected in the "Display" menu → "System",
or when the signal is coming from the HDMI
terminal.
Aspect
You can set a screen size to fit the image while
maintaining the aspect ratio of the input signal.
1. Press  to select "Aspect" and then
press the OK button.
2. Press  button to select the item, then
press the OK button.
Normal
17
Projects the image at the maximum size while
0
maintaining the aspect ratio of the input signal.
0
Wide
0
Projects the image at 16:9 aspect ratio.
Normal
Front
Full
Center
To provide an image to fit the screen.
Blue
* "Full" is not available with video input.
Advanced (EK-307W VGA 1 only)
Adjust the proportion and position of the screen
manually.
Project Way
This function is used to set the project way.
1 Press MENU button on the remote control
to display screen menu. Press  button to
select "Display", then press the OK button.
2 Press button to select "Project way",
press the OK button.
3 Press button to select the item you want
to set, press the OK button.
Front
Projects to front screen when projector is front
standing.
Rear
Projects to rear screen when projector is front
standing.
Ceiling/Front
Projects to front screen when projector is in ceiling
state.
Ceiling/Rear
Projects to rear screen when projector is in ceiling
state.
Auto ceiling/Front
Projects to front screen and modify as front
standing or ceiling automatically.
Auto ceiling/Rear
Projects to rear screen and modify as front
standing or ceiling automatically.
Display
Aspect menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect Normal
Project way
Menu position
Background display
System 1024 x 768, 60Hz
Project way menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect Normal
Project way
Menu position
Background display
System 1024 x 768, 60Hz
17
0
0
0
Front
Center
Blue
17
0
0
0
Front
Center
Blue
33