Features and Design This multimedia projector is build with the HLD light source, not only the great image quality through 3LCD technology and the longer life time as 25,000 hours. The color depth of this projector is up to 1.07 billion colors. And the Input/output terminal has located on the side of the projector to provide more convenient for the usage.
Table of contents Features and Design ......Expand Table of contents Language ...........46 ........3 Safety operation guideline Auto Setup ..........45 .....4 Compliance Keystone ............47 ..........11 Accessories Logo ............49 ..........12 Security ............49 Overview Power Management........51 Name and function of the projector Filter counter ..........51 Front/top ............14 Test pattern ..........52...
Safety operation guideline Safety instructions This document and the projector employ certain symbols to illustrate how to use the projector safely. They are described below: Please get yourself familiar with them before going through this document. Ignoring messages indicated by this symbol may lead to personal injuries Caution or deaths due to human errors.
Page 5
Safety operation guideline Notes Caution Safety precautions: ● GROUND the projector. ● Lens of the projector projects strong light. DO NOT look at the light beam directly. You may get the eyesight hurt. This is especially the case with children. ●...
Page 6
Safety operation guideline Note: Precautions on location of the projector: ● Place the projector in a proper location or it may result in fire. ● DO NOT expose the projector in rain or high humidity environments or it may result in fire or electric shock.
Page 7
Safety operation guideline Note: Precautions on using the projector: ● DO NOT project the same image for long time as residual images may be left in the panel. This is a property of LCD panel. ● Use power as indicated in tags attached to the projector. If you have doubts over available power type, consult the dealer or local power company first.
Page 8
Safety operation guideline Air ventilation Openings in the casing are designed for ventilation and overheating prevention. DO NOT block or cover these openings to keep the projector in normal operation and from overheating. Note: Heat exhaust at the air outlet. Keep the following in mind when using or installing the projector: –...
Page 9
360° Safety operation guideline The projector supports 360° projection vertically and horizontally. 360° 360° 360° Note: • Enable the “Ceiling” function if flip over screen is required. Note: Precautions on ceiling mount racket installation: M4x10 10mm ● Get qualified technician to install the ceil- ing mount racket.
Page 10
Safety operation guideline Moving the projector When moving the projector close its adjustment legs as they may damage the lens and casing. Keep the projector in suitable box when it is not to be used for a long time. Note: Precautions on moving or shipping the projector: ●...
Model Number : EK-355U Trade Name : EIKI Responsible party : EIKI International, Inc. Address : 30251 Esperanza Rancho Santa Margarita CA 92688-2132 Telephone No. : 800-242-3454 (949-457-0200) AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
Name and function of the projector Front/top LED indicator (Power / Status / Filter) ① Remote controller receiver (front) ② Focus ring ③ Projection lens ④ Zoom ring ⑤ Cover of lens shift ring ⑥ Control panel ⑦ Exhaust vent ⑧...
Name and function of the projector Control Panel 157.6 • Power / Stand-by Power on or off the projector • Left / Right / Up / Down – Select items or adjust values in the OSD menu. 161.0 – Select display area in digital zoom+ mode –...
Name and function of the projector Terminal ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ ⑯ ⑰ VIDEO IN ① ⑨ When using the Memory Viewer function, insert Connect video output signal to this terminal. the USB Flash Drivesy to this terminal directly.
Name and function of the projector Remote controller VGA 1 Select VGA 1 input source. COMPONENT Select Component input source. INPUT Open or close the INPUT menu. AUTO Optimize a computer image automatically Arrow –Select items or adjust values in the OSD menu –Select display area in digital zoom+ mode.
Page 18
Name and function of the projector IMAGE Select image mode. D.ZOOM+ Zoom in projected image. FREEZE Freeze projected images. D.ZOOM- Zoom out projected image. SCREEN Select screen size. KEYSTONE Keystone calibration. PATTERN Select built-in test pattern of the projector. INFO. Display current status information of the projector.
Name and function of the projector Install battery of remote controller Open the battery cover. Insert a new battery in it. Two AA (LR6) batteries Place the batteries with its anode and cathode (+ and -) in correct direction. Keep both poles in good connection to the contacts within the compartment.
● Ambient brightness may affect the projection image quality. For the optimal image effect, it is recommended to control brightness in the environment. ● Values shown in figure below are approximates only. They may differ from the actual ones. 300" 200" 150" 100" 40" EK-355U (16:10) Unit:cm 40" 100" 150" 200" 300" Screen size...
Installation Lens shift adjustment The electric lens shift function may adjust the lens in all four directions. This function enables easy image position adjustment. The projection location of the image may be Move lens to moved upward a distance up to 38% of the top position length of the image.
Connection to equipment Connection to computer Cables used for connection: ● VGA cable ● USB cable* ● HDMI cable* ● USB device* ● Serial cable* (*Cables are not supplied with the projector) USB-A RS232 output output output HDMI input output output HDMI Serial...
Connection to equipment Connection to video equipment S-video Component Video output output output Video S-video Component cable conversion conversion cable cable Video S-video Component input input input Unplug power cords of the projector and all external equipment before connecting any cable to them.
Connection to equipment Connection to audio equipment External audio equipment Audio Audio Audio output output input (R) (L) Note: The left and right channels are combined Audio Audio cable Audio cable when there is only the cable (stereo) (stereo) L(mono) is inserted. (R) (L) Audio Audio...
Connection to equipment Connect the AC power cord Standard voltage employed by the projector is AC 100-240V. It adapts to different input voltage automatically. The projector employs 2-phase power cord with neutral ground cable. Do not use any other type of power cords or you may face the risks of electric shock.
Basic operation Power on the projector Power Power 1. Connect all external equipment to the projector (e.g. computer or media player) before powering it on. 2. Connect AC power cord of the projector to an AC power socket. The Power indicator turns on in red. 3.
Basic operation Power off the projector Power 1. Press the Power button at the control panel or the remote controller, the “Power off?” message displays. 2. Press the Power button again in 4 seconds after the “Power off?” message prompted to you.
Basic operation Zoom / focus function ZOOM ring FOCUS ring (outer) (inner) Rotate the ZOOM ring to zoom in or zoom out the image. Rotate the FOCUS ring to adjust the focus of the image. ① Lens Shift function Perform the lens shift adjustment with ① and ②...
Basic operation Auto setup function Press the AUTO button on the remote control- Auto ler to auto execute settings given in the Auto Setup menu (including Auto Searching, Auto Expend PC Adjusting and Auto Keystone). Auto setup Input search Expend Auto PC adj.
Page 32
Basic operation Remote controller operation Use the remote controller for common operations. Blank (BLANK) Press the BLANK button on remote controller a blank screen displays to replace existing image. Press the BLANK button or any other button to restore the image. Press the BLANK to toggle switch the screen BLANK as shown below:...
Page 33
Input selection Input select Remote control Direct operation Press HDMI 1, HDMI 2, VGA 1, VGA 2, VIDEO, HDBase T, COMPONENT or USB-A on the remote control as input source. HDMI 2 VGA 2 Menu operation HDBaseT HDMI 1 1 Press INPUT button on the remote control or VIDEO VGA 1 control panel to display the input select menu.
Page 34
Input selection Remote control Select it when the video input signal S-video is connected to VGA IN 2(YPbPr/ S-VIDEO) terminal via S-Video to VGA adaptor cable HDMI 2 VGA 2 HDBaseT HDMI 1 When input source is from device Memory Viewer VIDEO VGA 1 connected to USB-A terminal, please...
Basic operation How to use the OSD Main menu Sub menu Display Auto PC adj. Fine sync H Position V Position H. Size Aspect Normal Project way Front Menu position Center Background display Blue System 1024 x 768, 60Hz Menu operation 1.
Basic operation Menu item overview Main menu Sub menu Display ① Auto PC adj. Fine sync ② H Position V Position ③ H. Size Aspect Normal ④ Project way Front Menu position Center ⑤ Background display Blue System 1024 x 768, 60Hz ⑥...
OSD Setting-Display Auto PC Adjusting The Auto PC Adjusting function may get Total Dots, Horizontal and Vertical position, Display area H, and Display area V aligned with computer input. Remote control Direct Operation Press Auto button on the remote control or control panel to launch the Auto PC Adj.
Blue *** Edge blending software and its System 1024 x 768, 60Hz manual can be downloaded from EIKI website. See page 69 for usage of Edge blending. Note: ● The adjustment of Fine sync, H Position, V Position and H.Size is only for computer signal input.
Page 39
OSD setting-Display Project way Project way menu Press button to select the project way. Front ..Projects to front screen when projector is Display front standing. Auto PC adj. Rear ..Projects to rear screen when projector is Fine sync front standing.
Page 40
OSD setting-Display System The projector automatically tunes to various types of computers with its function of Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically de- tects the signal format and tunes to project proper images without any additional setting. One of the following messages may ap- System menu pear when input source as computer:...
OSD setting-Color Adjust (HDMI 1, HDMI 2, VGA 1, VGA 2, Me- mory Viewer, Network and USB Display signal) Color Adjust Menu operation 1 Press the MENU button on remote controller and the OSD displays. Press button select Color Adjust icon, press button or OK button to confirm the selection.
Page 42
OSD setting-Color Adjust (Video, Component and S-video signal) Color Adjust Menu operation 1 Press the MENU button on remote controller and the OSD displays. Press button select Color Adjust icon , press button or OK button to confirm the selection. 2 Press button to point to required item and press OK button to confirm the selection.
√: All commands are active *X: Power On command is active with “Wake On LAN” software. Note: ● The “Wake On LAN” software and its manual can be downloaded from EIKI global website https://global.eiki.com. File Name : Software_WakeOnLAN High land Control the fan speed through the Setting menu.
Page 44
OSD setting-Setting Closed caption (Video signal only) Setting Allows the subtitle to be displayed for the audio On start contents or other information. If the input source Standby mode contains closed caption, you can enable this High land function and change the channel. Press to Light source control Cooling fast Normal...
Page 45
OSD setting-Setting Sound Adjust the volume. Volume ..Press button to increase the volume, press button to decrease the volume. Mute ..Press button to switch mute function. (On/Off) HDMI setup (HDMI only) Switch the settings of "Image" or "Sound" in "HDMI setup"...
OSD setting-Expand Expand Select the Expend menu to set up other functions of the projector. 1. Press the MENU button on remote controller and the OSD displays. Press button to select Expand icon, press button or OK button to enter the submenu. 2.
OSD setting-Expand Keystone Keystone menu This function is used to store or reset the keystone correction when the AC power cord is Expend unplugged. Keystone Keystone Store 1 Press MENU button on the remote control to H/V Keystone display screen menu. Press button to select Corner correction "Expand", then press the OK button.
Page 48
OSD setting-Expand Corner correction Adjust when the four corners of the projected image are distorted. Press▲▼◄►to adjust the item. Corner correction Upper left Upper right Lower left Lower right Note: ● The white arrows indicate that there is no correction. ●...
OSD setting-Expand Logo This function allows you to customize the screen logo with Logo select, Logo PIN code lock and Logo PIN code change functions. Logo Select This function decides on the starting-up display Logo from following options. Default . Show the factory-set logo. Expend Off ..
OSD setting-Expand Security Security This function allows you to use the PIN code lock and PIN code change functions to set the Expend security for the projector operation. Language Auto setup PIN code lock Keystone Logo This function prevents the projector from Security being operated by unauthorized persons Power management...
OSD setting-Expand Power management Power management For reducing power consumption as well as maintaining the LED light source life, the Power Expend management function turns off the projection LED Language light source when the projector is not operated for a Auto setup certain period.
OSD setting-Expand Test Pattern This function is used to set the internal test Test Pattern signal: Gray scale 1, Gray scale 2, Gray scale 3, Gray scale 4, Color bar, Red, Green, Blue, Expend Cross hatch, White, Black and Raster gray. Language Auto setup Keystone...
OSD setting-Expand (3) When DHCP is setting as On, IP address, Network setting Subnet, Gateway and DNS will be obtained DHCP automatically, press the OK at "Set" to confirm IP address Subnet the parameters. Gateway When DHCP is setting as Off, press the OK Cancel button to enter IP address, then press ...
OSD setting-Memory Viewer Memory Viewer The Memory Viewer function makes it possible to project the pictures which are stored in the USB memory when the USB memory is inserted into the projector 1 Press MENU button on the remote control to display screen menu. 2 Press ...
OSD setting-Info. Information The information menu is used to the detect signal of projected image and running state. Menu operation info. menu Press MENU button on the remote control or control panel to display the screen menu. Press to select Info., the information menu Info.
Description on network control operation LAN control Function : PC controls projector via LAN. Preparation: 1. Equipments: PC, projector, cables 2. Connection procedures: Connect the projector to routers or switches of the LAN by direct on cross cable. If it fails to connect PC and projector by parallel cable, please switch to cross cable as suggested.
Page 58
Description on network control operation 4. Activate the Web browser in the personal computer. 5. Enter the IP address set by the projector into the URL input field of the Web browser. 6. Select "Login" to login the Network Display System page. (Both the initial name and passwords are "admin".) Note: ...
Page 59
Description on network control operation "System Status" page Display the status of the projector for the following items. ① ② ③ ① Model Name ③ LAN Status Displays the model No. of the projector. Displays the connection status of the LAN. ②...
Page 60
Description on network control operation ① Brightness ④ Color Adjusts the brightness of the projected image. Adjusts the color saturation of the projected image. ② Contrast Adjusts the contrast of the projected image. ⑤ Tint Adjusts the skin tone of the projected image. ③...
Page 61
Description on network control operation "Network Setup" page ① ② ① LAN Setup Gateway Select [Obtain an IP address automatically] Enter the default gateway address when if you want to enable the DHCP client. not using a DHCP server. IP Address Enter the IP address when not using a DHCP Enter the DNS server when not using a server.
Description on network display operation Network Display function 1. PwPresenter software: when "Network" is selected in Source Select, you can project the current computer images via network. Input the IP address of the projector in webpage to enter the Network Display System, click "Download"...
Page 63
Description on network display operation Play/Pause ② Play or pause the selected image. ③ Choose capture mode Choose a capture mode from "Full Screen", "Fixed Size" or "Alterable." ④ Parameters Setting Basic Setting Setting language, region of capture image etc. Advanced Setting Setting image quality, network port etc.
Page 64
Description on network display operation Multicast Setting Setting Sound volume, Bandwidth and Capture rate etc. ⑤ Network Display Management Setting device and password management. ⑥ Disconnect the projector.
Description on using Memory Viewer function Memory Viewer function The Memory Viewer function is used to project the pictures which are stored in the USB memory when the USB memory is inserted into USB A(VIEWER) terminal of the projector. Memory Viewer function supports the following image files. Extension Format Description...
Description on using USB display function USB Display function The USB Display function is used to project the image from the computer which is connected to Micro- USB(DISPLAY) terminal of the projector by a USB converting cable. ■ When using Windows Windows operation environment Windows 7 32/64 bit, Windows 8 32/64 bit, Windows 8.1 and Windows 10 Intel Core 2 Duo 2.0 GHz or faster, the compatible processor...
Page 67
Description on using USB display function ■ When using Mac OS Mac OS operating environment Mac OS X 10.5, 10.6, 10.7 or newer version Power PC G4 1GHz or faster Amount of memory 512 MB or more Hard-disk free space 20 MB or more Display Resolution 640 x 480 or more, 1 600 x 1 200 or less ●...
Adjustment: The color and effect of the overlay edge can be adjusted with the Edge Blending software. The Edge Blending Software and its manual can be downloaded from EIKI website. URL: http://www.eiki.com Note: ● Edge Blending function can only effected with the same resolution projectors.
Regular maintenance Status light indicator The STATUS indicator shows status of projector protection function. Check STATUS and POWER indicator for good maintenance operation. Note: Unplug the AC power cord in case of any abnormality as it may lead to fire or electric shock. The projector turns off and the STATUS indicator flashing orange.
Regular maintenance Clean the projector when it is contaminated by foreign matter or its display effects are get- ting worse. Note: Unplug the AC power cord before any cleaning operation. Clean the lens Wipe the lens with clean cloth dampened with non-abrasive camera lens cleaner or clean it with lens cleaning paper or air blower.
Regular maintenance Reset the filter counter 1 Press MENU button and the OSD displays. Press button to select Expend menu, press button or OK. 2 Press button to select "Filter Counter", press button or OK. Press button to select “Filter counter reset” and press OK. The “Filter counter reset?” message displays. 3 In another pop-up dialog box, select Yes to reset the filter counter.
Appendix Troubleshooting Check the following before calling the dealer or service center: Troubleshooting Solution Power on failure – Plug the power cord of the projector in an AC socket. – Make sure the POWER indicator turns red. – Restart the projector until the POWER indicator turns red. It indicates the projector is ready for power on again.
Page 75
Appendix Abnormal color – Check the setting mode of signal, color system, image system, or computer system. – Make sure Blackboard mode is not selected in Image selection. Some operations are – Check the display function. invisible Auto PC Adjusting function –...
Appendix Light indicator status Check light indicator to learn status of the projector. Light indicator POWER Status of the projector STATUS FILTER Green /Red / Orange The projector is in Off status (without AC power supply). The projector is in standby status. Press Standby button to turn it The projector is in normal status.
Appendix Compatible computer screen The projector is designed to accept every analog computer signal below Dot Clock 160MHz and digital computer signal below Dot Clock 150MHz. See table below for details on resolution and relevant frequency. Source Specification Display Component HDMI Video/ S-Video H-Freq.(KHz)
Appendix Menu tree Main menu Sub-menu Setting Default value Remarks Auto PC adj. Fine sync 0-31 H Position -5 - +5 V Position -5 - +5 The range of H Size H Size -15 - +15 differs from signals. Normal Wide Aspect Normal...
Page 80
Appendix Default Main menu Sub-menu Setting Remarks value Contrast 0-63 Brightness 0-63 Color 0-63 Component Input Tint 0-63 Color adjust S-Video Input 0-63 Video Input Green 0-63 Blue 0-63 Sharpness 0-15 On start On/Off Standby Mode Eco/Normal/Network High land On/Off Light source Normal/Eco Normal...
Page 81
Appendix Main menu Sub-menu Setting Default value Remarks PIN code lock On/Off Security PIN code change Ready Shut down Power Ready management Timer Ready Countdown Filter counter Off, 500H, Filter counter Timer 1000H, 2000H Filter counter reset Expand Off,Gray scale(1-4) ,Color bar, Test pattern Red,...
Page 82
Appendix Main menu Sub-menu Setting Remarks Input H- sync. Freq. V- sync. Freq. Info. Light source status Light source counter Power management Image mode Input VGA 1 VGA 2 HDMI1 HDMI 2(MHL) HD-BaseT Component Video S-video Memory Viewer Network USB display...
Appendix PIN code memorandum Write down the PIN code in the blank below and keep it, If you forgot or lost the number and unable to operate the projector, contact the service center. Factory default PIN code 111* PIN code lock Factory default PIN code 111* Logo PIN code Lock No.
Page 87
E-Mail: info@eiki.de Fax: +420 241-409-435 E-Mail: info@eiki.cz China South East Asia EIKI (Shanghai) Co., Ltd. EIKI Industrial (M) Sdn Bhd LAKESIDE OASIS MIDDLE RING No. 11, Nouvelle Industrial Park, BUSINESS CENTRE Lorong Teknologi B, Taman Sains Block 1,Room 606, Selangor 1, Kota Damansara PJU5,...