Eiki EK-306U Owner's Manual page 29

Network Control Instructions
"System Status" page
Display the status of the projector for the following items.
① Model Name
Displays the model No. of the projector.
② Versions
Displays the version of the firmware of the
projector.
"General Setup" page
Change Password for Webpage is displayed.
① Enter Old password
Enters the configured password.
② Enter New password
Enters the new password.
③ Confirm New password
Enters the wanted new password again for
confirmation.
56
①
②
③
③ LAN Status
Displays the connection status of the LAN.
①
②
③
④
⑤
⑥
④ Apply
Updates the settings.
⑤ Power
Switches on/off the power of the projector.
⑥ Source Select
Switches the input source of the projector.
Network Control Instructions
"Picture Setup" page
① Brightness
Adjusts the brightness of the projected image.
② Contrast
Adjusts the contrast of the projected image.
③ Sharpness
Adjusts the sharpness of the projected image.
①
②
③
④
⑤
⑥
④ Color
Adjusts the color saturation of the projected
image.
⑤ Tint
Adjusts the skin tone of the projected image.
⑥ Color Temperature
Adjusts the color temperature of the projected
image.
57