Table of Contents
Advertisement
Organization of
Thermo Fisher Scientific
This manual is divided into six sections and appendices. The early sections
describe set up of the system's hardware and software, while later sections
Manual
explain the advanced features of the TEOM 3600 PDM. Users should read
and understand earlier sections before attempting procedures described
later in the manual. The following list provides an overview of the topics
handled in each section of this manual:
Chapter 1 "Introduction" explains features of the PDM and describes
●
the contents of this operating manual and the theory of operation of
the device, as well as providing information about internal flows,
sample inlets, and the flow control calculations.
Chapter 2
●
software for the PDM and provides an overview of the PDM's
firmware and explains the unit's status codes ("error" conditions).
Chapter 3
●
manual and programmed samples.
Chapter 4
●
logging, view real-time data during the sample run and how to
download data from the PDM.
Chapter 5
●
PDM's performance and describes basic maintenance procedures.
Chapter 6 "Troubleshooting" presents guidelines for diagnosing
●
equipment failures.
Appendix A
●
consumables with the PDM.
"Basic
Operation" describes how to set up the hardware and
"Using the WinPDM
Software" explains how to set up
"Viewing and Saving
Data" describes how to configure data
"Maintenance and
Calibration" explains how to verify the
"Parts and
Consumables" lists the spare parts and
Introduction
Organization of Manual
PDM 3600 Instruction Manual
1-5
Advertisement
Table of Contents
