Start Sample Screen; Starting A Manual Sample - Thermo Scientific 3600 PDM Manual

Basic Operation

Start Sample Screen

Start Sample
Starting a
Manual Sample
To start a first manual sample
2-14 PDM 3600 Instruction Manual
(B) more options...
Start Sampling screen, Hours Used, or the View Errors screen. Refer to the
appropriate section for more information on these screens.
The user can initiate a manual sample run through the Start Sample screen.
When in the Start Sampling screen
Screen
display the Start Sample screen
Figure 2–23. Start Sample screen
The Start Sample screen contains the following information:
(A) Start Sample. This field contains directions on how to start a
●
manual sample run.
(B) Duration: 001:15. This field contains the time duration of the
●
manual sample run. Press the "B" button to increase the time duration
of the manual sample run.
From the Start Sample screen, users can begin a manual sample run when a
PC is not available or when a manual sample is desired. If the conditions
change or the employees moves to a different area, a second manual sample
run can be started running concurrently with the first sample run.
1. In either the Idle screen or the Sampling Complete Screen #1, press the
run:
"A" and "B" buttons simultaneously to display the Start Sampling
screen.
2. In the Start Sampling screen, press the "A" button to display the Start
Sample screen
3. To change the time duration of the first manual sample run before
beginning the run, adjust the time duration by pressing the "B" button.
4. In the Start Sample screen, press the "A" button to begin a manual
sample run. The Warming screen will display
sample run begins, the instrument will display First Sample Screen #1
(Figure
This field contains directions on how to display the
(Figure
(Figure 2–23).
2–25).
(Figure 2–21), press the "B" button to
2–23).
(Figure 2–24). When the
Thermo Fisher Scientific