Start Sampling Screen; Exit Screen - Thermo Scientific 3600 PDM Manual

Start Sampling

Exit Screen

Thermo Fisher Scientific
All screen displays and functions described in this chapter apply to both
types of sample runs, except that a programmed sample run cannot be
stopped from the instrument keypad.
While the WinPDM program (Chapter 3) allows users to access advanced
features of the unit, including programmed sample runs, the user can
Screen
initiate a manual sample run using the instrument's display and buttons.
When in the Idle screen (or the Sampling Complete Screen #1 if a sample
has been recently completed), press both the "A" and the "B" buttons
simultaneously to display the Start Sampling screen
After 30 seconds of inactivity in the Start Sampling screen, the PDM will
automatically turn off its LED display. Press the "A" button to reactivate
the LED display and to bring up the Idle screen, or the Sampling Complete
Screen #1 (if the sample run is complete).
Figure 2–21. Start sampling screen
The Start Sampling screen contains the following information:
(A) Start Sampling. This field contains directions on how to start a
●
manual sample run. When in the Start Sampling screen, press the "A"
button to begin the sample run.
(B) more options... This field contains directions on Hours Used,
●
View Errors screen, and on how to exit the Start Sampling screen. Refer
to the following section for information on using the Exit screen.
The user can exit various screens through the Exit screen
Figure 2–22. Exit screen
The Exit screen contains the following information:
(A) Exit
from which you accessed the Exit screen. When in the Exit screen, press the
"A" button to exit the screen from which you accessed the Exit screen.
This field contains directions on how to exit the screen
Basic Operation

Start Sampling Screen

(Figure 2–21).
(Figure 2–22).
PDM 3600 Instruction Manual 2-13