Exiting the WinPDM
Software Application
To exit the WinPDM software
Thermo Fisher Scientific
Figure 3–4. WinPDM showing "Not Connected"
Note If the cable connections are secure, and the PDM is functioning
correctly, but you still cannot make a successful connection between the
PDM and PC, contact Thermo Fisher Scientific.▲
When the programming is complete, users can disconnect the PDM and
exit the WinPDM software.
1. When in the PDM - COM1 screen, select the "Done" button located
application:
in the bottom, right-hand corner of the screen. The WinPDM Main
screen will become the active screen on your laptop/personal computer.
2. When in the WinPDM Main screen, select the "X" icon in the top,
right-hand corner of the screen to exit the WinPDM software
application. You also can exit WinPDM by selecting File> Exit from
the drop-down menu.
Using the WinPDM Software
Starting WinPDM
PDM 3600 Instruction Manual
3-5