Starting Winpdm - Thermo Scientific 3600 PDM Manual

Starting WinPDM

To start the WinPDM software
New connection
icon
Thermo Fisher Scientific
10. When in the WinPDM - InstallShield Wizard screen with an
"InstallShield Wizard Completed" message, select the "Finish" button.
You do not need to restart your computer to use WinPDM. Double-click
on the WinPDM icon on the PC's desktop to start the WinPDM
communications software program.
The TEOM 3600 PDM must be connected to the charger and a PC to use
the WinPDM program. Refer to Chapter 2 for information on connecting
the PDM unit to the charger and establishing communications.
1. Connect the PDM unit to its charger and the charger to your PC
application:
(Chapter 2). Make sure both are on.
2. Ensure that the charger and PDM are connected (Chapter 2).
3. Double-click on the WinPDM icon on the desktop to start the
program. You also can select the "Start" button on your personal
computer's (PC's) screen, and when the Start menu displays, select
Programs > Thermo > WinPDM."
4. The WinPDM Main screen will display. The splash screen in the
middle of the screen will disappear after a few seconds, and then the
"PDM-New Connection" screen will display
Figure 3–2. WinPDM Main screen with PDM New Connection screen
Using the WinPDM Software
Starting WinPDM
(Figure 3–2).
PDM 3600 Instruction Manual 3-3