Flow Of Menu Operations - Ikegami HTM-1990R Operation Manual

(2) Flow of MENU Operations

MENU can be switched as follows using the MENU switch.
ESC switch ON
ESC switch ON
ESC switch ON
ESC switch ON
＜ Normal Screen ＞
MENU switch ON
MENU1 <FORMAT>→ 1080I/60
1.MULTI SDI FM AUTO
2.RGB/YPbPr FM HDTV
3. →1035/1080I 1080I/60
4. →RGB/YPbPr YPbPr
5.TEST SIG. FM 525I/60
6.INPUT DISP. ON
7.COLOR POINT P22 (EBU)
NEXT →(MENU)
SELECT→(ENT) EXIT→(ESC)
MENU switch ON
MENU2 <MODE> VER ： 01.8
1.CENT.MARKER ON
2.MARKER COLOR ■
3.SHADOW LEVEL 40%
4.CHANGE ASPE. AUTO
5.SET UP OFF
6.REMOTE NO. 01
7.DEGAUSS TM. 1
NEXT →(MENU)
SELECT→(ENT) EXIT→(ESC)
MENU switch ON
MENU3 <CHANGE DATA>
1.SELECT FILE FILE1
2.STORE FILE FILE3
3.CHANGE FILE MANUAL
4.LOAD FACTORY ALL
NEXT →(MENU)
SELECT→(ENT) EXIT→(ESC)
MENU switch ON
MENU4 <STATUS> (FILE1)
HUE 50.0 HEIGHT
CHROMA 50.0 WIDTH
BRIGHT 60.1 H.CENT
CONT 61.0 V.CENT
G.GAIN 62.5 ROTAT.
B.GAIN 61.2 H.PHASE 10.0
R.BKG 50.2 H.CONV
G.BKG 52.4 V.CONV
B.BKG 48.5 TRAPE
APT OFF SIDE. P.
NEXT →(MENU) EXIT →(ESC) %
MENU switch ON
Set the format of each input signal.
Set each mode.
Switch FILE, or transfer data from one FILE to another.
Check data on the screen by percentage points displayed.
50.0
60.4
60.1
63.5
60.0
–
–
45.2
40.3
32