Ikegami HTM-1990R Operation Manual page 29

HUE PRESET switch
２ １
Switch for adjusting the HUE PRESET data.
This circuit operates only when the NTSC decoder
module DE-811 is mounted and the analog/digital
(D2) NTSC composite signal input is selected.
For details of the adjustment, refer to 4.6 (4).
CHROMA PRESET switch
２ ２
Switch for adjusting the CHROMA PRESET data.
For details of the adjustment, refer to 4.6 (4).
BRIGHTNESS PRESET switch
２ ３
Switch for adjusting the BRIGHTNESS PRESET
data.
This circuit does not operate in the DELAY state.
For details of the adjustment, refer to 4.6 (1).
CONTRAST PRESET switch
２ ４
Switch for adjusting the CONTRAST PRESET
data.
For details of the adjustment, refer to 4.6 (2).
STORE FILE switch
２ ５
Switch for copying the currently displayed color
temperature data to FILE 1 to FILE 3.
FILE 1 to FILE 3 blink when the switch is pressed.
Press the desired destination FILE switch. The
FILE LED lights up and the data is copied to the
FILE.
The PRESET data to be stored includes the
following nine data shown in the white frames on
the panel.
HUE, CHROMA, BRIGHT, CONT,
R.BKG, G.BKG, B.BKG, G.GAIN, B.GAIN
FILE 1 switch
２ ６
Set this switch to ON to output or store data in
FILE 1.
FILE 2 switch
２ ７
Set this switch to ON to output or store data in
FILE 2.
FILE 3 switch
２ ８
Set this switch to ON to output or store data in
FILE 3.
MENU switch
２ ９
Switch to call various menus.
ENT switch
３ ０
Switch to execute MENU operations.
ESC switch
３ １
Switch to exit MENU.
U. DISPLAY switch
３ ２
Not available in this version.
ASP-80 input connector
３ ３
Input connector for the optional auto setup probe
ASP-80 (option).
ROTARY ENCORDER
３ ４
Used for changing the PRESET data in the drawer
panel and selecting items in the MENU mode.
21