Wifi Module Setting - Alpha ESS SMILE-B3-PLUS Installation Manual

WIFI SETTING

8.3 WiFi Module Setting

This section is for users who have a system with a WiFi module.
AlphaESS App is able to complete network configuration, change setting of the system
basic parameter, and monitor system operation and configuration information.
Login
Register
Step 1: Open AlphaESS APP, click
the "Wi-Fi Configuration" button and
enter the WiFi configuration
interface.
AL40010109000000
Password
12345678
Connect to Router System
the hotspot Configuration Configuration
Auto reconnest
Please make sure that the POWER light of the Wi-Fi
module is always on, and then connect the mobile
Adwanced
phone Wi-Fi to the Wi-Fi Network named after the
S/N number of your product.
Open the Wi-Fi network list
Cancel
Step 3: If your mobile phone hasn't connected to the system's hotspot, please open
the Wi-Fi network list and find the hotspot named by the product SN, then enter the
password "12345678" and connect to it. After successfully setting it, please go back to
the APP and click "Next".
Connect to Router System
the hotspot Configuration Configuration
Please make sure that the POWER light of the Wi-Fi
module is always on, and then connect the mobile
phone Wi-Fi to the Wi-Fi Network named after the
S/N number of your product.
Next
Step 2: After that, please check
whether your mobile phone has
connected to the system's hotspot.
Connect
44 45
Connect to Router
the hotspot Configuration
Choose the name of the WIFE
AlphaESS
shengyou
AlphaESS-Server
Derrick_test
AlphaESS
AlphaESS
Jump Over
Step 4 Select the WiFi of your home, enter the password, complete the WiFi configura-
tion and submit. If there is no network currently, you can click Jump over to skip the WiFi
configuration step and directly set the system parameters.
NOTE:
The system will not be able to connect to the Internet without WiFi config-
uration.
Connect to Router
the hotspot Configuration
Grid Meter CT
PV Meter CT
Safety Regulations AS4777.2
Regional application
Default
standard
Max. Feed-in(%)
Victoria
Max. Feed-in(%)
Queensland
South Australia
Ausgrid
Endeavour Energy
Essential Energy
Submit
Horizon Power
Connect to Router System
System
the hotspot Configuration Configuration
Configuration
Wi-Fi admin
Change
Enter the password
Password
Submit
Step 5 Set basic parameters, including PV capacity on
System
Configuration
the grid side, the type of meters, safe-ty regulations and
Meter
regional application standard. Click "Submit" when the
Meter settings are complete.
NOTE:
When the safety regulation is set as AS4777.2, the
secondary sub-options can be selected according to the
region or local grid company (Please refer to Appendix
2).
WIFI SETTING
Connect to Router System
the hotspot Configuration Configuration
Successfully configured
Next