Table of Contents
Advertisement
NOTE:
6.7 Record, Timeshift and Format
To use these functions, you must connect a USB memory device to the USB port at the front panel.
For best performance, especially of HD content, we advise to use Hard Disk drives USB 2.0 or higher.
These must be formatted in FAT32 format, otherwise Record and Timeshift function will not work.
6.7.1 Instant recording
To immediately record a programme, press 4 to start the recording and press 3 to quit. During a
recording it is possible to press p q, or OK and p q to change to another channel on the same
transponder (frequency) only. Also, it is possible to use the 0~9 buttons.
6.7.2 Timeshift
If you want to use the Timeshift function you only need to press 2 in viewing mode. To resume
timeshifted content, press u or 2 again. During the playback you can use the 5 6 or 2 buttons. To
stop the Timeshift mode, press 3 and it will jump to the actual time of the live signal. The function
will still be running in the background and as long you do not switch to another channel it is possible
to jump again to the beginning by pressing 2 again. Also, with t u it is possible to jump in time
during Timeshift modes.
If the channel is changed timeshifted content will only be accessible from the newly selected channel.
6.7.3 Timer recording
There are 2 ways to set a timer:
Programming a record timer via the EPG
The easiest way to record an event is via the EPG. Press the EPG button to open the EPG, then use
p q to select a channel. After that, press t u and use p q to select an event. You can book a
record timer by pressing GREEN button to set a timer for a selected event.
Programming a record timer via the Timer menu
Press the MENU button on the remote control in viewing mode, select in menu System Setup option
Timer. This way you are free to programme 8 timers. For further details about this menu, please refer
to chapter 7.3.5 Timer in the user manual.
6.7.4 Playback
After a recording has been made you will find a new folder ALIDVRS2 created on your external USB
storage device. Press the MENU button select Media Player.
Inside the Media Player menu the following functions are supported:
p q
OK
3
NUMERIC 1~6
10
Availability of EPG data depends on broadcast.
To select a record event.
Starts playback in preview and again in full screen mode.
Stops playback
Number 1 toggle between the file types, Music, Image, Video and
PVR(records).
Number 4 allow to rename a selected record.
Advertisement
Table of Contents
