Media Player - Strong SRT 8215 Installation Instructions Manual

Digital terrestrial hd receiver
Hide thumbs Also See for SRT 8215:
Table of Contents

Advertisement

7.3.7 OSD Setting
This menu allows you to select long or shorter time for banner which appears after switching
channels.
If you like can also select some transparency of menu, to see in background the TV programme.
OSD Timeout:
OSD Transparency:
7.3.8 Audio Description Setting
Audio Description Service:
Use AD as default:
Audio Description Volume offset:
7.3.9 Other
Here you will find some special options which you can use or change values if you like.
Options are Channel play type, Beeper, Auto Standby and Time.
Channel Play Type:
Beeper:
Auto Standby:

7.4 Media Player

The Media Player menu consists of the following submenus: Media Player, PVR Storage Information
and Remove of USB safely.
7.4.1 Playback of Multimedia
This function allows playback of different kind of files from the connected USB storage device.
In the Media player menu, select with numeric key 1 on remote between PVR and press OK to show
the recordings you've made. Select Video and press OK to enter this menu to play all kind of video
formats. Select Music to playback files as MP3 formats. Select Image to playback your favourite
pictures in JPG or BMP format.* In this menu Media player and made lot playback functions by using
the numeric keys 1~9 on your remote control. These functions are displayed on bottom of this menu.
Functions change on every other selected item or option.
Sets the time after which on screen banners and messages disappear. The
range is 1~10 seconds.
To set the OSD transparency from 00 ~ 40% with 10% steps.
AD. Set this option to On if you like to have support of an audio track that
describes the content on screen. Useful for the visual impaired.
Set this option to On if you like to have AD support always if available audio
track that describes the content on screen. Useful for the visual impaired.
Select the volume from the AD audio track.
Here you select what happened if you zap channels UP or Down. Set this
option to Free then during zapping of channels you get only Free to Air
channels. Select Scrambled to see only coded channels or All to see all
channels during zapping of channels.
If you switch to On will you hear in Beep tone in Manual scan menu. This
helps you during adjusting your antenna on selected channel to hear that
there are signal levels. If Beep stop then also signal levels are too low or 0%.
Auto Standby is a new feature that helps you reducing power consumption.
When set to between 1 to 4 Hours, the receiver will switch to standby if it
doesn't receive any commands of the remote control during this time. Set
Auto Standby to Off to deactivate the automatic standby function. The default
setting is 3 hours.
15

Advertisement

Table of Contents
loading

Table of Contents