Table of Contents
Advertisement
3.4 Connecting a USB storage device
This port can be used for USB storage devices such as USB pen drives or HDD with a maximum peak
current of 500 mA. It is recommended to use USB 2.0 storage devices (or higher) for playback of video
files or HD movies.
3.5 Connecting to Ethernet for RSS feeds and weather
forecasts
To use this option of your receiver it must be connected to your router. Connect the Ethernet (RJ-45)
connector with a class CAT5E (or higher) cable to your router.
3.6 Connection to main power supply
After all the connections are done you can connect your digital receiver to the mains power.
3.7 Extended connections for your home entertainment
Connecting to a digital audio amplifier and TV using HDMI
By connecting your receiver to an HDMI equipped digital amplifier or home cinema set you will
enjoy the best possible sound quality and multi-channel audio (depending on broadcast). Connect
the HDMI output of the unit to an input of your amplifier, and then connect the HDMI output of the
amplifier to your TV set. Select the correct input on your amplifier to watch and listen to programmes.
4.0 STARTING UP FOR THE FIRST TIME
When you use your receiver for the first time, the Welcome menu appears.
In this menu you need to select the first important settings as "Region" where receiver is used, the
"Language" you like to use in menu and if using active antenna which need "Antenna Power" to
function. Use t u to select and use p q to move the highlight to next item in the menu. Once you
have done these selections, select "Search" and press OK button to start scanning.
The following settings are available:
Region:
Language:
Antenna Power:
Select the region in which the receiver is used. The selections England,
Hungary, Poland, Denmark, Italy and France will store channels in Logical
Channel numbering (LCN). This means that it is operator defined which
channel will be stored on position 1 and so on. Sorting of channels
afterwards is not possible. If you like to sort the channels yourself, set the
region/country to Other.
Select the language you like to use in menu or from region where receiver
is used. The audio channels will set automatically to this selection as first
priority.
Set to On if you use an active antenna (with built-in amplifier). When set to
On, 5 V will be present at the ANT IN connector of the receiver. Select Off for
passive antennas.
Fig. 6
Fig. 7
Fig. 7
Fig. 8
7
Advertisement
Table of Contents
