Mod. 26.25M FR
Avvitare alternativamente di 1/2 giro alla volta in senso
orario le viti di rilascio freno A,B e C fino a quando si
inizia a sentire una certa resistenza.
Avvitare alternativamente di 1/2 giro alla volta le viti A,
B e C per 5 ÷ 5,5 giri.
Spostarsi da sotto il veicolo e liberare l'area circostante
dal personale non coinvolto dalle operazioni.
Rimuovere con attenzione i ceppi di bloccaggio dalle
quattro ruote e trainare il veicolo in un luogo sicuro.
Bloccare nuovamente le quattro ruote e continuare
con le operazioni che necessitano.
Alternately screw 1/2 turn brake release bolts A, B & C
inxard direction (clockwise) until you first begin to feel
resistance.
Alternately screw 1/2 turn the bolts A, B and C inward
direction of 5 ÷ 5,5 turns.
To get out from under the vehicle and clear the area of
any unnecessary personnel.
Carefully remove the blocking from each of the four
tires and tow the vehicle to asecure location.
Block all four wheels and continue following the
procedure.
: 00/00
/
: CA357152
REVISION DATE
P
N
OPERAZIONI DI MONTAGGIO
ASSEMBLY OPERATIONS
E.12
PAG
.
80