Technical Specifications; Sr6602-I/Sr6602-Ie Technical Specifications - H3C SR6602-I AI Series Hardware Information

• For service continuity, avoid touching the power button accidentally or mistakenly during device
operation.
• If a virtual machine cannot be shut down gracefully, log in to it, terminate the running processes,
and then shut down it.
The power button is used to power on or power off the Comware system and virtual machines
created on the Comware system.
To gracefully shut down the Comware system when the device is operating, press and hold the
power button for 0.5 to 4 seconds. To forcibly shut down the Comware system, press and hold the
power button for more than 4 seconds.
By default, pressing the power button on a powered-off device starts the Comware system but not
the virtual machines. You can use the
started together with the Comware system.

Technical specifications

SR6602-I/SR6602-IE technical specifications

Table1-1 SR6602-I/SR6602-IE technical specifications
Item
Console port
Management Ethernet port
10/100/1000BASE-T Ethernet
copper port
10GBASE-R-SFP+ Ethernet
fiber port
USB port
Drive slot
FIP slot
Fan tray slot
Power supply slot
PCIe slot
M.2 drive slot
Memory capacity
Memory type and size
Built-in storage
command to configure the virtual machines to be
autostart
SR6602-I
1
1
12
20
1, USB 3.0 (host mode, type A)
2 (2.5-inch SATA drive)
1
3 (FAN3 slot is reserved)
2
1, PCIe 3.0 ×16 slot
1 (M key)
32 GB
Default: 8GB DDR4 RDIMM
(standard)
Maximum: 104 GB (one 8GB and
three 32GB DDR4 RDIMMs)
4 GB
1-4
SR6602-IE
32 GB
Default: 32GB DDR4 RDIMM
(standard)
Maximum: 128 GB (four 32GB
DDR4 RDIMMs)
64 GB