Advertisement
Instructions for kit #DH77K
(before painting; page 9)
B. Pre-Assembly
Glue and tape together the Floors and Floor Extensions:
Angled corner is here -
line up carefully using a
Divider as a straight-edge
Identify the outsides of the Roofs.
Mark the Roofs' outsides with shingle lines.
This is the top
The wider edge is the bottom
Mark the Front Roofs 1
Connect the marks with a straight-edge.
Transfer the marks to the Side Roofs at the corners
(the sloped edge).
Connect the marks on the Side Roofs.
Front Roofs
Connect the marks
Transfer the marks at the corners
Note: The Base Floor and Base Floor Extension
1
are
/
" thick (thinner than the Upper Floors)
4
This is the outside
at the bottom, then every 1".
1
/
4
Front Roof
Divider is a straight-edge
Floor Extension
This is the outside
Side Roof
Paint page 6
Corner
Floor
1"
1"
1"
1"
Mark
1
1
/
4
Connect the marks
"
Advertisement
