Advertisement
Instructions for kit #DH77K
11. Space the Attic Divider a bit away from the Tower
Side so glue squeezings won't get on the Attic Divider in
the next step.
Glue, tape, and weight a Rooftop to the Roofs and Tower
Side, lined up in back, and with the overhang on the side
even from front-to-back.
When the glue has set enough to move the Attic Divider,
adjust the weights so they are only over the Roofs and
move the Attic Divider to the other side (spaced from the
Tower Side) and repeat for the other Rooftop.
Tape
12. Glue, tape, and weight the Tower Ceiling to the
Tower Walls, lined up in back, and centered side-to-side.
Weight
Lined up in back
Let the glue dry - then take off the weights and tape
Lined up in back
1
Here I have a 2
/
" Divider
2
temporarily in place to see
the overhang more easily
Lined up in back
Centered side-to-side
page 17
Tape
Advertisement
