Advertisement
Instructions for kit #DH77K
□
3A. Glue and tape Wall F to the back of Wall E and
to the Base Floor, spaced with the 13" Divider from the
Base Floor's right edge.
3B. Scrape the paint hidden within the area that wall F will
when they are glued together. You don't
1
cover on Wall G
have to get right to the edge of the hidden space or get all
of the paint - just a bit of exposed wood will give a good
glue joint.
3C. Glue and tape Wall H to the back of Wall G1 and
to the Base Floor (If you painted the interior of Wall G
scrape within the hidden space for gluing).
Wall H
Wall E1
Lined up
Wall E1
" spacing to the floor's edge and that Wall H
3
Check the
/
8
lines up with the back edge of the Base Floor.
Using a 2
3
for
/
" spacing
8
Wall F
View from the top
Glue and tape Wall G1 to the back of Wall F and to the Base
Floor. Use the 13" Divider to hold the spacing from the
back edge.
Take care to line up the corner carefully inside the house...
it is hard to smooth this corner once the house is complete.
1
Wall G
Wall F
,
1
1
/
" Divider
2
1
Wall G
13" Divider, lined
up on the edges
Lined up at the back edge
Walls and Floors page 12
F
13" Divider
Advertisement
